Publications
Papers and slides on the latest developments in simulation data management and our software solutions can be found here.
2021
- Softwarelösung für Management und Analyse von Simulations- und Versuchsdaten (Abstract)
- G. Geißler, M. Liebscher (SCALE), NAFEMS-Online-Seminar "Integration von Simulation und Test in der Produktentwicklung", June 2021
2020
- Prediction of Simulation Results with Integration of SDMZIP in SCALE SDM Solutions (Slides)
- A. Gärttner, M. Thiele, A. Pillai (SCALE), S. Mertler (DYNAmore), automotive CAE Grand Challenge, Hanau, September 2020.
- Erkennung von FEM-Geometrien mit Methoden des Maschinellen Lernens (Master Thesis)
- Nick Scheider, TU Dresden, 2020.
- ML-supported Design Methods for Determining Permissible Input Variables for Crash Simulation using the Example of FEM (Master Thesis)
- Julian Haluska, TU Dresden, 2020.
- ML-supported Design Methods for Determining Permissible Input Variables for Crash Simulation using the Example of FEM (Presentation Master Thesis)
- Julian Haluska, TU Dresden, 2020.
- Erkennung von FEM-Geometrien mit Methoden des Maschinellen Lernens (Presentation Master Thesis)
- Nick Scheider, TU Dresden, 2020.
2019
- Application of Machine Learning Techniques through Simulation Data Management (Slides)
- Marko Thiele (SCALE), VDI-Fachkongress Automotive CAE, Baden-Baden, November 2019.
- Parameter prediction and automated generation of Car- body-connector-technologies in CAX-applications
- Maximilian Knorr, Universität Stuttgart, 2019.
- Estimation of Spot Weld Design Parameters using Deep Learning (Paper)
- Akhil Pillai, Uwe Reuter (TU Dresden), Marko Thiele (SCALE), 12. Europäische LS-DYNA Konferenz, Koblenz, Mai 2019.
- On the Setup and Simulation of Large Scale LEGO Models Build with LS-DYNA and LoCo (Paper)
- T. Gerlinger, D. Koch, A. Haufe (DYNAmore), N. Karajan (DYNAmore Ohio), M. Thiele, A. Saharnean (SCALE), 12. Europäische LS-DYNA Konferenz, Koblenz, Mai 2019.
- Automated Evaluation and Reporting of Simulation and Test Result Data integrated with CAE Process Workflow
- Akhil Pillai, Uwe Reuter (TU Dresden), Marko Thiele (SCALE), 12. Europäische LS-DYNA Konferenz, Koblenz, Mai 2019.
- Investigations into crash behaviour of LEGO cars (Paper)
- Marko Thiele (SCALE), Ingolstadt, Februar 2019.
- Empowering the Application of Machine Learning Techniques through Simulation Data Management (Slides)
- Marko Thiele (SCALE), automotive CAE Grand Challenge, Hanau, April 2019.
- Parameter estimation for spot weld design in automotive construction (Master Thesis)
- Akhil Pillai, TU Dresden, 2019.
2018
- Pushing Storage and Bandwidth Requirements of SDM towards Reasonable Levels [Erweitertes Abstract]
- Matthias Büchse, Marko Thiele (SCALE) [Erweitertes Abstract], NAFEMS European SPDM Conference, München, November 2018.
- Pushing Storage and Bandwidth Requirements of SDM towards Reasonable Levels [Slides]
- Matthias Büchse, Marko Thiele (SCALE), NAFEMS European SPDM Conference, München, November 2018.
- Prospects of Integrating CAD and CAE in Simulation Data Management
- Marko Thiele, David Matthus (SCALE), Clemens Knehler (AUDI), NAFEMS European SPDM Conference, München, November 2018.
- Software solution for the integration of test data (CAT) and simulation (CAE) in the system engineering process (Slides)
- Heiner Müllerschön (SCALE), simpulse day Simulation 4.0, Stuttgart, Oktober 2018.
- Solution for Evaluation, Assessment and Reporting of Simulation and Test Result Data (Abstract)
- Gordon Geißler, Ayush Kumar (SCALE), 15. LS-DYNA-Forum, Bamberg, Oktober 2018.
- Prospects of integrating CAD and CAE in Simulation Data Management (Slides)
- Marko Thiele, David Matthus, Peter Friedrich (SCALE), Clemens Knehler (AUDI), 15. LS-DYNA-Forum, Bamberg, Oktober 2018.
- Pushing storage and bandwidth requirements of SDM towards reasonable levels (Extended Abstract)
- Matthias Büchse, Marko Thiele (SCALE), 15. LS-DYNA-Forum, Bamberg, Oktober 2018.
- Systems Engineering. Auswertung, Bewertung, Vergleich und Validierung von CAT und CAE-Ergebnissen (Slides)
- Gordon Geißler, Infotag SCALE, Stuttgart, Mai 2018.
- Prospects of integrating CAD and CAE in Simulation Data Management (Slides)
- Marko Thiele, David Matthus, Peter Friedrich (SCALE), Clemens Knehler (AUD), 15. LS-DYNA-Forum, Bamberg, Oktober 2018.
- Facting Future Challenges in Crash Simulation Engineering - Model Organisation, Quality and Management at Porsche
- Koch, M., Mattern, S. (Porsche), Bitsche, R. (SCALE), Facing Future Challenges in Crash Simulation Engineering - Model Organization, Quality and Management at Porsche, 15th International LS-DYNA Users Conference, Detroit, Michigan, USA, June 2018.
2017
- New Developments on Compression and Transfer of Simulation Data within an SDM System (Paper)
- Matthias Büchse, Marko Thiele, Heiner Müllerschön (SCALE), NAFEMS World Congress, Stockholm, Juni 2017.
- New Developments on Compression and Transfer of Simulation Data within an SDM System (Slides)
- Matthias Büchse, Marko Thiele, Heiner Müllerschön (SCALE), NAFEMS World Congress, Stockholm, Juni 2017.
- Recent Developments in LoCo Instant Collaboration in Simulation Data Management (Paper)
- Robert Bitsche, Marko Thiele, Torsten Landschoff (SCALE), Marcel Koch (Porsche), 11. Europäische LS-DYNA Konferenz, Salzburg, Austria, Mai 2017.
- Recent Developments in LoCo Instant Collaboration in Simulation Data Management (Slides)
- Robert Bitsche, Marko Thiele, Torsten Landschoff (SCALE), Marcel Koch (Porsche), 11. Europäische LS-DYNA Konferenz, Salzburg, Austria, Mai 2017.
- Application of Model Order Reduction Techniques in LS-DYNA (Paper)
- Peter Friedrich (SCALE), Uwe Reuter (TU Dresden), Daniel Weigert (AUDI), 11. Europäische LS-DYNA Konferenz, Salzburg, Austria, Mai 2017.
- Application of Model Order Reduction Techniques in LS-DYNA (Slides)
- Peter Friedrich, Marko Thiele (SCALE), Uwe Reuter (TU Dresden), Daniel Weigert (AUDI), 11. Europäische LS-DYNA Konferenz, Salzburg, Austria, Mai 2017.
- Systems Engineering with Status.E and CAViT – Comparison and Assessment of CAT & CAE Data (Paper)
- Gordon Geissler, Martin Liebscher, Rainer Hausdorf (SCALE), Marcel van den Hove (AUDI), 11. Europäische LS-DYNA Konferenz, Salzburg, Austria, Mai 2017.
- Hierarchical Multi-Level-Optimization of crashworthy structures using automatic generated submodels (Paper)
- Harman Singh, Axel Schumacher (Universität Wuppertal), Carlos J. Falconi D., Alexander F. Walser (asc(s), Sven Trentmann, Leyre Benito C. (GNS), Christophe Foussette, Peter Krause (divis intelligent solutions), Heiner Müllerschön (SCALE), 11. Europäische LS-DYNA Konferenz, Salzburg, Austria, Mai 2017.
2016
- Integrierte Lösung zum Bewerten, Vergleichen und Validieren von CAE- und CAT-Daten
- Martin Liebscher, Gordon Geissler, Rainer Hausdorf (SCALE), 3. NAFEMS-Konferenz, April 2016.
- CAViT | Status.E: Evaluation, Comparison and Validation of CAT & CAE Data
- Martin Liebscher, Gordon Geissler, Rainer Hausdorf (SCALE), Informationstag Prozessautomatisierung und Simulationsdatenmanagement, Mai 2016.
- LoCo: An Innovative Process and Team Data Management Solution for Simulation
- Marko Thiele, Torsten Landschoff, Heiner Müllerschön, Martin Liebscher (SCALE), Informationstag Prozessautomatisierung und Simulationsdatenmanagement, Mai 2016.
- LoCo: Multistage Assembly with a Wheel Generation Process Example
- Alexandru Saharnean, Marko Thiele, Daniel Rentsch (SCALE), Informationstag Prozessautomatisierung und Simulationsdatenmanagement, Mai 2016.
- Kompression von Simulationsergebnissen im Kontext von SDM-Systemen
- Stefan Mertler (SIDACT). Informationstag Prozessautomatisierung und Simulationsdatenmanagement, Mai 2016.
- Compression Methods for Simulation Models in SDM Systems
- Justus Richter, Wolfgang Graf (TU Dresden), Matthias Büchse, Marko Thiele, Clemens Löbner, Martin Liebscher (SCALE), 14. Deutsches LS-DYNA Forum, Bamberg, Oktober 2016.
- CAViT | Status.E: Evaluation, Comparison and Validation of CAT & CAE Data
- Martin Liebscher, Gordon Geissler, Rainer Hausdorf (SCALE). 8. Automotive CAE Grand Challenge, Hanau, April 2016.
2015
- LoCo: Neue und geplante Entwicklungen im SDM-System LoCo
- Marko Thiele (SCALE). Informationstag Prozessautomatisierung und Simulationsdatenmanagement, Stuttgart, März 2010.
- CAViT: Auswertung von Versuchs- und Simulationsdaten (Kurzvorstellung)
- Martin Liebscher (SCALE), Informationstag Prozessautomatisierung und Simulationsdatenmanagement, Stuttgart, März 2010.
- Effiziente und interaktive Auswertung großer Mengen von CAE-Modellvarianten
- Jocken Garcke (Universität Bonn, Fraunhofer SCAI), Rodrigo Iza Teran (Fraunhofer SCAI), Informationstag Prozessautomatisierung und Simulationsdatenmanagement, Stuttgart, März 2010.
- VAViD: Daten auf Diät
- Bernd Müller. Erschienen in: weiter.vorn. Das Fraunhofer-Magazin (2/15). S. 22 f. Februar 2015.
- New Developments in LoCo
- Marko Thiele, Torsten Landschoff (SCALE). 10th European LS-DYNA Conference 2015, Würzburg, Juli 2015.
- Using LoCo for Multi Run Simulations
- Richard Luijkx (AUDI), Marko Thiele (SCALE). 10th European LS-DYNA Conference 2015, Würzburg, Juli 2015.
- LoCo: An Innovative Process and Team Data Management Solution for Simulation
- Marko Thiele, Torsten Landschoff (SCALE), Andreas Johann Beck (AUDI), NAFEMS European Simulation Process and Data Management (SPDM) Conference, München, Dezember 2015.